Technical information
- Installation:Indoor
- Rated load:350 kg
- Power supply:1 x 230 VAC +/- 10%, 20 A, 50/60 Hz, min. 3 x 2,5 mm². The same power supply with 16 A is possible with 0.10 m/s speed and a rated load of 250 kg for sizes S, M and L or 265 kg for size XL with single entry.
- Speed:0.13 m/s
- Min headroom:2300 mm
- Lift pit:0 mm
- Drive system:Screw and nut
- Max travel:4270 mm
- Max number of stops:2
- Lift controls:Hold-to-run operation both to call the lift and to travel. All lift sizes come with a vertical control panel and two wireless remote controls for the landings. Lift sizes M-XL also include handrail controls.
- Motor Power:2.9 kW
- Machine room:Machine room less (MRL), electrical cabinet, fitted to the mast (left/right) on the ground floor or remote (<3m)
- Door configuration:Single entry (S, M, L, XL), open-through (XL)
- Directives and standards:MD 2006/42/EC and applicable parts of EN 81-41:2024
Main advantages
iF Design Award 2025
Cibes Ascenda was awarded the globally acknowledged iF Design Award for its compact, user-friendly and elegant product design.
Space-saving lift
Thanks to its ingenious, through-the-floor design, Cibes Ascenda can virtually disappear from one floor and reappear on the next.
4 different lift sizes
Cibes Ascenda comes in 4 sizes, from S to XL. Sizes S-L are great for everyday comfort, while size XL is big enough for wheelchairs.
Minimal construction work
Thanks to its ready-made, pitless, shaftless and machine room less design Cibes Ascenda only requires minimal construction work.
Lift sizes & floor cut out information
Lift sizes & floor cut out information | |||
|---|---|---|---|
| Cabin size - W x D mm | Cut out size - W x D mm | ||
| S - 600 x 700 | 1132 x 930 | ||
| M - 800 x 700 | 1332 x 930 | ||
| L - 1000 x 700 | 1532 x 930 | ||
These lift sizes & floor cut out are for everyday person, people with walking disability and walkers.
| Cabin size - W x D mm | Cut out size - W x D mm |
|---|---|
| XL - 850 x 1250 | 1375 x 1496 |
These lift sizes & floor cut out are for stroller, wheelchair and heavy bags.
Lift sizes & floor cut out information
What is cut out size?
The cut out size refers to the dimensions (width x depth, mm) of the floor opening for the safety hatch and mast.
Width x Depth
The width is always side A/C and the depth is always side B/D. The machinery is always on side D.
Hatch information
The frame of the floor hatch needs 30 mm on all sides that are not placed directly against a wall.
Downloads
| Cibes Ascenda Brochure.pdf | 1076 KB | Download |